Submissions

I will post most any type of drum corp collectible, but it needs to be sent to me as follows:

(1) You can send me digital photographs or scans of photographs that you have. It is very important that they are GOOD images and are at the highest resolution possible (within reason). I can scale them to the proper sizes for use on the site. I will make sure that I credit you with donating the image (example below).

(2) You can send me scans of the collectible. This is the desired method to use with pins and patches. I do have a couple of suggestions to produce the best quality scan. I recommend that you set your scanner settings to a minimum of 720dpi (pixels). I used a setting of 720 dpi to scan my pins and patches, but 320 dpi will be sufficient. I also suggest that you use a setup as shown below:

By using a piece of foam (or any other material) to keep the scanner top from sitting on the collectible will result in a better image.

(3) If possible also measure the dimensions so I can post this.

(4)Contact me either by email (rgelmquist@yahoo.com) or via the Contact button on this page. We can then work out the best way to transmit the images to me.

Thanks so much for your help!